CAR pans are made without a rolled edge. The top edge is left unfinished and may be sharp so it can cut dough. Sheeted dough can be placed over the pan and then cut off with a rolling pin or pie roller.
• CAR tapered/nesting hard coat pizza pan
• Heavy weight
• Rolled unfinished edge
• Sheeted dough placed over sharp edge can be cut with rolling pin or pie roller
• Hard coat finish will not flake off, but is NOT non-stick and must be seasoned
• Made in USA
| Material: |
| 14 gauge (1.5 mm) aluminum |
| Finish: |
| Hard coat anodized |
| Depth: |
| 11/16" |
| Inside Diameter: |
| 8" |
| Outside Diameter: |
| 9" |