Secure your blades with the Victorinox 47303 BLADESafe Knife Guard and ensure your sharpest knives are safely stored at all times. Conveniently sized and built of lightweight, durable plastic, this guard holds blades from 8 to 10 inches in length. Peggable and completely dishwasher safe! Whether you’re on the go or just need to keep those sharp edges protected, this Knife Guard is an exceptional accessory for any kitchen.
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Will this Bladesafe work for a 10" Cemiter knife?
A:Yes, this product works for ten inch blades.
A:No, this Victorinox Knife Guard will not be suitable for a Cimeter style of knife due to the unique shape of its blade design.
Q:i have knife 8 in. long and 2 1/4 wide. will this fit into this guard?
A:Yes, your 8" x 2 1/4" knife will fit in the guard. The knife guard is approximately 2 5/8" wide.
A:No, the maximum width which will fit easily in this guard is two inches. The inside diameter is actually 2 1/8 inches which would be tight for a blade 2 1/8 inches wide and may not fit a knife that wide depending on the blade shape.
A:This knife guard will be 1/4" too short. You can still use it but you must understand that the cover will leave approximately 1/4" of the blade uncovered.
A:The 10 inch guard will leave about 3/8 inch of the blade near the handle outside the guard unprotected. It will work this way if the cutting edge if the blade is straight with the knife handle. If the blade extends down from the handle, it may not work. Fortunately, my bread knife is 9 7/8 inch long and the blade is straight with the handle and it works fine.