Get up to 400 meals per service taken care of with the Robot Coupe - CL50E - 1.5 HP Commercial Food Processor with Continuous Feed. You can slice and grate and do a number of other things to meet the demands of a busy kitchen without any issues. The magnetic safety switch on the CL50E unit keeps operators hands and fingers safe at all times. When you need consistent processing, consider the Robot Coupe 1.5 HP Commercial Food Processor with Continuous Feed (CL50E), with its long-lasting stainless steel motor and body.
Hi Lee, We probably wouldn't recommend soaking these components in bleach--just warm, soapy water should do the trick. For detailed cleaning instructions and clarification on the material makeup, I'd give Robot Coupe a call at 1-800-824-1646.
Yes, that particular dicing disc can be found here: https://www.etundra.com/restaurant-parts/prep-equipment-parts/food-processors/robot-coupe-28115-25-mm-1-inch-dicing-kit/
Nathan the pizza guy
The 1.5 HP Commercial Food Processor w/ Continuous Feed can be used with the included grating disc to shred mozzarella cheese.
The vendor has notified me that they do sell a food processor with the following specs 220V/ 60Hz/ 1 phase. If you are looking to purchase the 220V model, please reference vendor part number XCL50E, you will also need to specify either 120V or 220V, depending on your preference.
Thanks for your question. After speaking with Robot Coupe they've assured me that the waste produced/left stuck to the blade of this CL50E 1.5 HP Commercial Food Processor is very little. Additionally, Robot Coupe offers a dice blade cleaning kit for properly cleaning the blade. It is Robot Coupe part #39881, and I've included it below for your convenience. https://www.etundra.com/restaurant-parts/prep-equipment-parts/dicers/robot-coupe-39881-dice-grid-cleaning-kit/
Apologies. That spec sheet was for the CL50 Series D model only. Here is the appropriate spec sheet with the correct disc accessories. http://www.etundra.com/ShowDocument.aspx?fileId=277957 There are measurements regarding how thin your finished product will be.
Yes, this Robot Coupe Food Processor will slice lettuce very thin, but you'll need a dicing disc attachment that does not come standard with the machine. Here is the spec sheet for the food processor: http://www.etundra.com/ShowDocument.aspx?fileId=30258 On the second page you'll find a comprehensive list of additional discs and kits that you can get to enhance your machine. Give our friendly sales staff a call at 1.888.388.6372 with the numbers you're looking at and we'll be more than happy to get you set up!
Yes, this will work well for ginger root. I have attached a video demonstration so you can see the Robot Coupe CL50D's capabilities. http://www.youtube.com/watch?v=BRjx6y9-kSA
This Robot Coupe food processor weighs 47 Lbs.