Turbo Air - M3F19-1 - M3 1 Door Reach-In Freezer

Price: $1,884.17/EA
Add to Cart to see our price.
You can remove it at any time.
Finance for as little as $49.91/month Apply Now
Shipping Info: Usually Ships Within 1-3 Business Days, M-F
Free Shipping

M3 1 Door Reach-In Freezer Features

  • Reach-in freezer
  • 25 1/4 in (W) x 77 1/8 in (H) x 31 1/2 in (D)
  • 4 in (Diam) swivel casters
  • 20 cu/ft capacity
  • -10°F - 0°F temperature range
  • Stainless steel front and sides with galvanized steel top, bottom and back
  • Aluminum interior with stainless steel floor
  • One section with (1) hinged, solid door
  • (3) adjustable, heavy duty polyethylene coated wire shelves
  • Recessed handle and lock
  • Incandescent interior light
  • High-density CFC-free polyurethane foamed-in-place insulation
  • R-404A refrigerant
  • Top mount compressor unit and automatic evaporator fan motor delay
  • 115V/60Hz/1-Ph, 1/3 HP, 5.3A
  • 9 ft, , NEMA5-15P power cableR
  • ETL listed
  • 3 year parts and labor warranty
  • 5 year compressor warranty
  • Width: 25 1/4 in
  • Cubic Feet: 20 ft
  • No. of Doors: 1 Door
  • Cabinet Access: Doors
  • Door Type: Solid

Do you have questions about this product?

Get answers from real customers and in-house experts with AnswerBox.

2 Questions | 3 Answers
Displaying questions 1-2
  • Q:

    Does this freezer have the capability to switch the door hinge to the left side?
    Asked on 10/23/2015 by Cole from Oklahoma City, OK

    1 answer

    • Staff Reviewer


      The Turbo Air - M3F19-1 has a field reversible hinge.

      Answered on 10/26/2015 by Steve from Boulder
  • Q:

    Is this freezer NSF certified.it only says ETL listed.

    Thank You.
    Asked on 7/20/2014 by Moon from Ohio

    2 answers

    • A:

      There is nothing in this products manual, nor on the vendor’s site (http://www.turboairinc.com/M3F19-1-P339.aspx), that says it is NSF certified. But I will double check with the vendor to make sure the information is accurate. When I hear back from them, I'll update the answer here.

      Answered on 7/21/2014 by Kasy Allen from Boulder, CO
    • A:

      In order for a product to be ETL certified, it must be NSF certified first. Once a piece of equipment is tested to meet ANSI/NSF standards in the US and Canada, it is issued a proprietary ETL sanitation mark. For more on this, please visit this link: http://www.intertek.com/marks/etl-sanitation/.

      Answered on 7/22/2014 by Kasy Allen from Boulder, CO
Displaying questions 1-2

Do you have a question about this product?