Federal Industries - SN-4HD - Series '90 48" Hot Deli Case

Price: $11,192.76/EA
Finance for as little as $296.50/month Apply Now
Shipping Info: Usually Ships Within 3-5 Business Days, M-F
Free Shipping
Documents: Manual

If minimal distraction from your products is the goal, then Series ‘90 bakery and deli display cases are the answer. These cases are designed to “disappear”, drawing the eye through double curved glass and nearly transparent frame to provide an unobstructed view of bakery and deli items. Merchandise will get the attention it deserves while being surrounded by a classic looking yet stylish display case.

Series '90 48" Hot Deli Case Features

  • Hot deli case
  • All welded base construction
  • Choice of (6) standard laminates on base
  • Neutral beige acrylic PVC trim
  • Interior is stainless steel
  • Designed for wet or dry heat
  • Lift up cylinder assisted tempered curved front glass
  • Four-point leveling system
  • Removable sliding rear doors with moisture vent panels
  • Includes rear wrapping board and appliance receptacle on back of case
  • (3) heating wells are one-piece stainless steel with each well heated with its own cal-rod element and controlled by its own thermostat
  • Each well has a drain and valve and holds a full size pan and a 1/3 pan
  • Top-mounted full length infrared heater and incandescent lighting
  • Forced air front glass defogger
  • A flexible fill hose with a 1/2” NPT connection is provided to fill pans with water
  • Drain connection is 1” NPT
  • 48 1/4”L x 37 3/4”W x 48 1/2”H
  • Standard electrical is 120/208-240/60/1 - 30 Amps, 3 wire plus ground
  • General receptacle is 120V, 15 Amp (2nd circuit required)
  • UL Safety and NSF listed
  • 1 year parts & labor warranty
  • No. of Sections: 1 Section
  • No. of Shelves: No Shelves
  • Width: 48 1/4 in

Do you have questions about this product?

Get answers from real customers and in-house experts with AnswerBox.

1 Question | 1 Answer
Displaying question 1
  • Q:

    I need to know how to install part #40-12767 heater for model #SN-4DHD serial #881059-2
    Asked on 1/14/2013 by flip

    1 answer

    • A:

      Unfortunately there are no detailed instructions on how to access and replace the heating element.

      A tech will access by removing the rear service panel at the bottom of the hot well. Then remove 2-4 screws at the bottom of the well to slide out and access the heater. If the tech has any questions he will need to call Federal while in front of the case at 800-356-4206.

      Answered on 1/14/2013 by Molly from Boulder, CO
Displaying question 1

Do you have a question about this product?