Cadco - THWT - Bi-Metal Thermostat

SKU: 461355
Price: $6.93/EA
Shipping Info: Stock item, same day shipping M-F

Bi-Metal Thermostat Features

  • 1/4” shaft with tab
  • (2) 1/4” male tabs

Equivalent to Part Numbers:

  • Cadco: THWT

Ad shows the switch with a retainer nut... It DON'T!!


Switch is useless without an anchor nut...


Waco, TX


Bi-Metal Thermostat

2.0 1


What is voltage and temperature range of the bi-metal thermostat? My old thermostat has like a channel bracket for mounting at knob hole. It has threaded screw going through center hole of insulator washers and threads into a metal washer on bottom of insulators. Does your thermostat assembled the same?? Thermostat is for a Maxi-Matic toaster oven broiler/rotisserie M/N RO-2002.


Hi Larry, This is a very specific part for a Cadco convection oven. They do not list the info you are requiring. Most of these bi-metal thermostats operate the same so you could always try it if it looks like what you have in there now.


what is the range in Farenheit of this bi metal thermostat.


This thermostat is designed for Cadco warming units and has a temp range from about 150 to 210.


Will this stat work?? I have a bad bi metal thermostat on an American Permanent Ware Pizza (food) warmer model DWC-17 120 volts. The one I took out is a sammax ar-491 rated at 175 degrees f. I found online that the correct part number is 69155. What is the temperature rating of this stat and will it work on this piece of equipment. Thanks--Art


As this unit is rather old, the manufacturer stated that this part is discontinued with no available replacement. If you can send a picture of the part, we can forward this to the manufacturer to see if they can find something that would substitute sufficiently.

Kasy Allen